+91 8866188126 [email protected]

EMS · Product design & development

Product design & development — from idea to a product you can build

Have an idea, a rough sketch or an existing board that needs improving? This page explains how an electronics product moves from concept to schematic, PCB layout, enclosure, prototypes and finally production — and how to start a design project with Microplacer.

Get an instant quote

In short

Product design and development, often called NPI (new product introduction), covers everything from an idea to boards coming off the production line: design review, schematic and PCB layout, enclosure fit, prototypes, test planning and production hand-over. Every design project is quoted after Microplacer reviews your requirement.

Last updated

How much does electronics product design cost?

It depends entirely on complexity — number of functions, board layers, enclosure work and revisions. Every design project is quoted after we review your requirement.

What should I send to start a design project?

Describe what the product should do, where it will be used, how it is powered and roughly how many you expect to build. Add your constraints: board or case size, connectors, target cost per unit, standards and your timeline.

See how it works

1/5 · Idea to schematic

Your idea and requirements are turned into a circuit — the schematic.

Product design & development: Idea to schematic — Your idea and requirements are turned into a circuit — the schematic. PCB layout — Parts are placed and routed on the board, then reviewed for manufacturing (DFM). Enclosure design — A 3D model checks that the board, ports and mounting fit the enclosure. Prototype & test — Prototypes are built and tested; findings feed back into the design. Pilot to production — After a pilot build, the proven design moves to regular production.

What this service is — and who it is for

Product design and development (often called NPI — new product introduction) covers everything between “I have an idea” and “boards are coming off the production line”. You can use the whole journey or only the parts you need.

Start-ups and makers

You have a concept or a working breadboard and need it turned into a proper PCB, a case and a small first batch.

Product companies

Your team owns the product but wants extra hands for layout, a design review, a prototype run or a move from prototype to regular production.

Redesign & cost-down

An existing product needs a new revision: replacing hard-to-find or obsolete parts, shrinking the board, or making it easier to assemble.

Students & research labs

Project or research hardware that has to work reliably beyond the lab bench and be built more than once.

Build-to-print customers

Already have finished, released files? You may not need design work at all — go straight to a turnkey PCB order.

Anyone unsure where to start

Tell us what the product should do. We will suggest which steps make sense for your project before anything is quoted.

The development process, step by step

Most electronics projects follow these stages. Each stage ends with a review, so mistakes are caught when they are still cheap to fix.

  1. 1

    Requirements and feasibility

    We write down what the product must do: functions, inputs and outputs, power source (battery, adapter, mains), size limits, operating environment, expected quantity and target cost. Unclear points are discussed with you before design starts.

    Tip: A one-page list of “must have” and “nice to have” features saves a lot of back-and-forth later.

  2. 2

    Concept and architecture

    The main building blocks are chosen — controller, sensors, power stage, communication (for example USB, Wi-Fi, Bluetooth, RS-485) — and the key components are checked for availability so the design is not built around a part that is hard to buy.
  3. 3

    Schematic design

    The circuit is drawn as a schematic with every component, value and connection. A schematic review checks power budgets, protection, reference designs and footprint choices.
  4. 4

    PCB layout and DFM review

    Components are placed and routed on the board, respecting the enclosure, connectors and any high-speed or high-current paths. The layout is then checked for manufacturing and assembly (DFM / DFA) against our PCB capabilities and assembly capabilities.
  5. 5

    Enclosure and mechanical design

    If the product needs a case, a 3D model is used to check that the board, connectors, displays, buttons and mounting holes all line up, and that cables and heat have a way out.
  6. 6

    Prototype build

    A small batch of boards is made and assembled — see PCB prototyping. If the product has firmware, it is loaded so the hardware can be brought up and tried.
  7. 7

    Testing and design updates

    Prototypes are powered up and checked against the requirements. Findings go back into the schematic and layout; a second prototype revision is common and normal.

    Tip: Plan time and budget for at least one revision — it is far cheaper than fixing a problem after production.

  8. 8

    Pilot build and production release

    A pilot batch confirms that the final files, BOM and test steps work at volume. The released files then go to regular production — PCB fabrication, assembly and, if needed, box build.

What you can ask us for

These are the typical pieces of a design project. Tell us which ones you need — what we can cover for your project, and the price, are confirmed after we review your requirement.

Piece of workWhat it involvesTypical outcome
Design reviewAn engineer checks your existing schematic and layout for errors, manufacturability and part availability.A list of findings and suggested changes.
Schematic & PCB layoutCircuit capture and board layout from your requirements or block diagram. See also PCB design & layout.Schematic, Gerber, drill, BOM and pick-and-place files ready for manufacturing.
Enclosure / mechanical fitChecking or designing how the board fits a case, with connector and mounting positions.3D model and drawings for discussion with your enclosure maker.
PrototypesBare boards and assembled boards in small quantities, with component sourcing.Working prototype boards for your evaluation.
Test planningDeciding how each board will be checked in production — see testing & inspection.A test approach agreed with you before volume builds.
Production hand-overFreezing the files, BOM and revision, then moving to regular orders.A released design package and production quotation.

How to start — what to send us

  1. 1

    Describe the product

    What it should do, where it will be used, how it is powered and roughly how many you expect to build. Photos, sketches or a similar product are very helpful.
  2. 2

    Share what already exists

    Any schematic, old Gerber files, BOM, firmware notes, datasheets of key parts or enclosure drawings. Not sure what format? See preparing your design files.
  3. 3

    Tell us your constraints

    Board size or case size, required connectors, target cost per unit, any standards the final product must meet, and your timeline.
  4. 4

    We review and propose a scope

    Our engineers review the information, ask any open questions and send a proposal with the steps that suit your project. Send your requirement through Contact us.

Already have production-ready files?

If your Gerber, BOM and pick-and-place files are final, you do not need a design project. Upload them on the online quote page — FR-4 and flex PCBs up to 16 layers get an instant price (other boards are quoted by our team), and assembly is priced from the solder pads in your files, with components quoted separately from your BOM. Boards with BGA, LGA or 0201 parts go to an engineering review first.

Quality and checks along the way

Good design is mostly about catching problems early. These are the checks a sound development process includes.

Reviews at every stage

Requirements, schematic, layout and prototype results are each reviewed before moving on, so decisions are recorded and agreed.

Manufacturability (DFM / DFA)

Layouts are checked against what can actually be fabricated and assembled, avoiding surprises at production time.

Part availability

Key components are checked for stock and lifecycle so the BOM can be built later — see global component sourcing.

Engineering file check

Before any order goes into production, our engineers check the files — the same check every Microplacer order receives.

100% electrical test of bare boards

Every bare PCB we make is electrically tested with a flying-probe tester to catch opens and shorts.

Standards awareness

If your product must meet specific standards, tell us early. Read certifications & standards explained and our quality standards page.

Product certification is a separate step

Safety, EMC, wireless or BIS approvals for a finished product involve testing at accredited or recognised labs, and the approval itself comes from the relevant certification body or authority. Design choices affect whether a product can pass, so mention required approvals at the start — but that testing and approval is a separate step from design and manufacturing.

Frequently asked questions

Yes. Share what the product should do and any sketches or reference products. We will discuss the requirement with you and propose which design steps are needed before giving a quote.

Ownership and deliverables are agreed in the project proposal before work begins. Ask us about this when you discuss the scope.

It depends entirely on complexity — number of functions, board layers, enclosure work and revisions. Every design project is quoted after we review your requirement.

Tell us what your product needs. We will tell you what can be covered as part of your project when we review the requirement.

Yes. If your files are ready, upload them for an instant PCB price (FR-4 and flex up to 16 layers) and add assembly. The minimum PCB order is 5 boards. See online ordering FAQ.

Yes — once the design is proven, the same files can be used for turnkey production: PCB, components and assembly under one order.

Yes. We source components and can handle the import for you, quoted per requirement — see import services and electronic components.

Related questions

Learn more — answers to the questions people ask next.

Related guides

Still have a question?

Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.

Streamline your innovation with seamless PCB ordering.

For More Details Contact Us