PCB manufacturing guide
How your PCB is made — and how ordering works
A printed circuit board is built up layer by layer from copper-clad laminate. Here is what happens to your design after you click “Order”, and what each option in the quote means for your board.
Get an instant quoteIn short
A printed circuit board is built layer by layer from copper-clad laminate: imaging and etching, lamination for multilayer boards, drilling, plating, solder mask, surface finish, silkscreen, routing and electrical testing. At Microplacer you upload your Gerber for an instant price, our engineers check the files, and the boards are made, tested and shipped.
Last updated
Watch: how a PCB is made
Your Gerber layers are reviewed by our engineers before anything is made.
Ordering PCBs online in 5 steps
- 1
Upload your Gerber
Upload a .zip or .rar of your Gerber and drill files on the Online PCB Quote page — no account needed. We read the board size and layer count and show a preview of the top and bottom of your board. - 2
Choose your options and see the price
Layers, thickness, colour, surface finish, quantity, panel and more. The price updates as you change options and includes GST and express shipping to your door. Every option has a short explanation — or see PCB terms explained. - 3
Save the quotation and order
Download the quotation PDF, then order from My quotes. You pay at order time by online payment (card / UPI / net banking) or by bank transfer. - 4
Engineering check
Our engineers check your files before production. If something must change — or the price is affected by what we find — we contact you first. You can accept the change or cancel with a refund. - 5
Production, testing and delivery
Your boards are manufactured, 100% electrically tested and shipped. Delivery is typically 10–15 working days including shipping. Follow every step in My orders.
Inside the factory: how a multilayer PCB is built
Single- and double-sided boards skip the inner-layer and lamination steps; the rest is the same.
- 1
CAM engineering
Your Gerber and drill files are checked and prepared for production: layers aligned, copper balanced, panel laid out, and design rules (track width, spacing, hole sizes) verified. - 2
Inner layer imaging and etching
For 4+ layer boards the inner copper layers are printed with a photo-resist image of your circuit; unwanted copper is etched away. The layers are then optically inspected. - 3
Lamination
Inner layers, prepreg (glass cloth with resin) and copper foil are stacked and pressed under heat and pressure into one solid board. - 4
Drilling
Holes for vias and component leads are drilled by CNC machines. Very small vias on high-density boards may be laser-drilled. - 5
Copper plating
The hole walls are made conductive and plated with copper so the layers are connected through the vias and plated holes. - 6
Outer layer imaging and etching
The outer copper layers are imaged, plated and etched to leave your tracks and pads. - 7
Solder mask
The coloured protective coating (green, black, blue…) is applied everywhere except on the pads to be soldered. It prevents solder bridges and protects the copper. - 8
Silkscreen
Component outlines, designators (R1, C5…), logos and text are printed on top of the solder mask. - 9
Surface finish
The exposed pads get a protective, solderable finish: HASL (solder coating), lead-free HASL, ENIG (flat immersion gold) or OSP. - 10
Electrical test
Every board is tested for open and short circuits with a flying-probe tester against your design data. - 11
Profiling (routing / V-cut)
Boards are cut to their final outline. Panels are V-scored or tab-routed so the boards can be broken apart later. - 12
Final inspection and packing
Boards are visually and dimensionally checked, packed safely and shipped.
Which options matter most?
| Option | What it changes | Usual choice |
|---|---|---|
| Layers | How many copper layers. 4+ layers add inner ground/power planes for dense or fast circuits. | 2 layers for simple boards |
| Thickness | Finished board thickness — stiffness, connector fit. | 1.6 mm |
| Surface finish | Coating on the pads. ENIG is flat — best for fine-pitch and BGA parts. | HASL (with lead) on 2-layer boards |
| Copper weight | Copper thickness; heavier copper carries more current. | 1 oz |
| Solder mask colour | Looks only — every colour works the same. | Green |
| Delivery format | Single boards or a panel. Assembly always needs a panel. | Single PCB (bare boards), Panel (for assembly) |
Need the exact limits?
Avoid the most common file problems
Board outline missing
Drill file missing
Wrong layer count
Text on copper
Tight clearances
Mixed units / old files
Related questions
Learn more — answers to the questions people ask next.
- How do I order bare PCBs?PCB fabrication service
- What are the rigid PCB limits?Rigid PCB manufacturing capabilities
- Which design rules must my PCB follow?PCB design rules and DFM checklist
- Which files do I need to send?Preparing Gerber, BOM and pick-and-place files
- What affects the price of a PCB?PCB cost factors and how to save
- HASL, ENIG or OSP — which finish should I choose?PCB surface finish guide
- How long does PCB manufacturing take?PCB manufacturing FAQ: lead time, testing and limits
Related guides
Still have a question?
Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.
Streamline your innovation with
seamless PCB ordering.