+91 8866188126 [email protected]

In short

Microplacer manufactures rigid PCBs from 1 to 32 layers in FR-4, aluminium-core, copper-core and RF materials. FR-4 boards reach 670 × 600 mm, thickness ranges from 0.4 to 4.5 mm, the minimum drill is 0.15 mm, and surface finishes are HASL, ENIG and OSP. Solder mask comes in seven colours.

Last updated

Layer count
1–32 layers
Max FR-4 size
670 × 600 mm
Board thickness
0.4–4.5 mm
Min drill
0.15 mm

How many layers can a PCB have?

From 1 to 32 copper layers. Controlled impedance is available on 4 to 32 layers.

What is the smallest and largest PCB you can make?

The regular minimum is 3 × 3 mm (10 × 10 mm with castellated or plated edges). FR-4 boards reach 670 × 600 mm, and 2-layer FR-4 PCBs up to 1020 × 600 mm.

Which surface finishes are available?

HASL (leaded or lead-free), ENIG and OSP. FR-4 has all three; 6+ layer and RF boards are ENIG only, aluminium-core boards HASL only and copper-core boards OSP only.

Features
Capability
Description
Patterns
Layer count
1-32 Layers
The number of copper layers in the PCB
Controlled Impedance
4/6/8/10/12/14/16/18/20/.../32 layers
Material
FR-4
Grade A laminates from suppliers including Nan Ya, KB, Shengyi and etc.
PCB Capability - Material
Aluminum-Core
1-layer Aluminum-core PCBs
PCB Capability - Material
Copper-Core
1-layer copper-core PCBs with direct heatsink contacts to core (≥ 1 × 1 mm)
PCB Capability - Material
RF PCB
1 oz copper, 2-layer RF PCBs with Rogers and PTFE cores
PCB Capability - Material
FR-4 Dielectric Constants
4.5 (2-Layer PCB)

7628 Prepreg 4.4

3313 Perpreg 4.1

2116 Perpreg 4.16

Maximum Dimensions

FR4 PCB: 670 × 600 mm

Rogers / PTFE Teflon PCB: 590 × 438 mm

Aluminum PCB: 602 × 506 mm

Copper PCB: 480 × 286 mm

These limits apply to PCBs with thickness ≥ 0.8 mm. The thinner FR4 PCBs are 500 × 600 mm maximum.

2-layer FR4 PCBs can reach a maximum size of 1020 × 600 mm.

PCB Capability - Maximum Dimensions
Minimum Dimensions
Regular: 3 × 3 mm. Castellated / Plated Edges: 10 × 10 mm.
These limits apply to PCBs with thickness ≥ 0.6 mm. Manual review required for thinner PCBs. Panelization is recommended for small-sized boards.
Dimension Tolerance
±0.1mm
±0.1mm(Precision) and ±0.2mm(Regular) for CNC routing, and ±0.4mm for V-scoring
Thickness
0.4 - 4.5 mm
Thickness for FR4 are: 0.4/0.6/0.8/1.0/1.2/1.6/2.0 mm (2.5 mm and above are for 12+ layer PCBs only)
PCB Capability - Thickness

Thickness Tolerance

(Thickness≥1.0mm)

± 10%
e.g. For the 1.6mm board thickness, the finished board thickness ranges from 1.44mm(T-1.6×10%) to 1.76mm(T+1.6×10%)

Thickness Tolerance

(Thickness<1.0mm)

± 0.1mm
e.g. For the 0.8mm board thickness, the finished board thickness ranges from 0.7mm(T-0.1) to 0.9mm(T+0.1).
Finished Outer Layer Copper
1 oz / 2 oz (35um / 70um)
Finished copper weight of outer layer is 1oz or 2oz.
PCB Capability - Finished Outer Layer Copper
Finished Inner Layer Copper
0.5 oz / 1 oz / 2 oz (17.5um / 35um / 70um)
Finished copper weight of inner layer is 0.5oz by default.
PCB Capability - Finished Inner Layer Copper
Soldermask
Green, Purple, Red, Yellow, Blue, White, and Black.
We use LPI (Liquid Photo Imageable) solder mask. This is the most common type of mask used today. Heat-cured ink soldermask is usually found on low-cost, single-sided PCBs.
Surface Finish
HASL (leaded / lead-free), ENIG, OSP (copper core boards only)

FR4 has all three finishes available, 6+ layers and RF boards only have ENIG.

Aluminium core boards only have HASL. Copper core boards only have OSP.

Features
Capability
Description
Patterns
Drill Diameter

1-layer: 0.3 – 6.3 mm

2-layer: 0.15 – 6.3 mm

Multilayer: 0.15 – 6.3 mm

Holes with diameter ≥ 6.3 mm are CNC routed from a smaller drilled hole.

Min. drill diameter for 2- or more-layer PCBs is 0.15 mm (more costly!)

Min. drill diameter for aluminum-core PCBs is 0.65 mm

Min. drill diameter for copper-core PCBs is 1.0 mm

PCB Capability - Drill Diameter
Hole size Tolerance (Plated)

Through-holes: +0.13 / -0.08 mm

Press-fit holes:±0.05 mm (multilayer ENIG boards only – mention the specific holes in PCB Remark)

e.g. for the 0.6mm hole size, the finished hole size between 0.52mm to 0.73mm is acceptable.
PCB Capability - Hole size Tolerance (Plated)
Hole size Tolerance (Non-Plated)
±0.2mm
e.g. for the 1.00mm Non-Plated hole, the finished hole size between 0.80mm to 1.20mm is acceptable.
PCB Capability - Hole size Tolerance (Non-Plated)
Average Hole Plating Thickness
18μm
Blind/Buried Vias
Not supported
Currently we don't support Blind/Buried Vias, only make through holes.
PCB Capability - Blind/Buried Vias
Min. Via hole size/diameter
0.15mm / 0.25mm

1-layer (NPTH only): 0.3 mm hole size / 0.5 mm via diameter

2-layer: 0.15mm hole size / 0.25mm via diameter 

Multilayer: 0.15 mm hole size / 0.25 mm via diameter


① Via diameter should be 0.1mm(0.15mm preferred) larger than Via hole size.

② Preferred Min. Via hole size: 0.2mm

PCB Capability - Min. Via hole size/diameter
Min. Non-plated holes
0.50mm
Please draw NPTHs in the mechanical layer or keep out layer.
PCB Capability - Min. Non-plated holes
Min. Plated Slots
0.5mm
The minimum plated slot width is 0.5mm, which is drawn with a pad.
PCB Capability - Min. Plated Slots
Min. Non-Plated Slots
1.0mm
The minimum Non-Plated Slot Width is 1.0mm, please draw the slot outline in the mechanical layer(GML or GKO)
PCB Capability - Min. Non-Plated Slots
Via Hole-to-Hole Spacing
0.2mm
PCB Capability - Via Hole-to-Hole Spacing
Pad Hole-to-Hole Spacing
0.45mm
PCB Capability - Pad Hole-to-Hole Spacing
Min. Castellated Holes
0.60mm

Castellated holes are metalized half-holes on PCB edges, commonly used on daughter boards to be soldered onto carrier PCBs.

① Hole diameter (Φ): ≥ 0.6 mm

② Hole to board edge (L): ≥ 1 mm

③ Hole to hole (D): ≥ 0.6 mm

④ Min. PCB size:10 × 10 mm

⑤ Min. PCB thickness: 0.6 mm

PCB Capability - Min. Castellated Holes
Plated Edges
10 x 10mm

Plated edges are copper-plated and ENIG treated. HASL is not supported.

① Min. PCB size: 10 × 10 mm

② Min. PCB thickness: 0.6 mm

③ At least 3 breaks (more for larger PCBs) in the edge plating are required for support tab connections

PCB Capability
Rectangular Holes / Slots
Not supported
Rectangular holes and slots without rounded corners are not supported.
PCB Capability - Rectangular Holes / Slots

Features
Capability
Description
Patterns
Min. track width and spacing (1 oz)
0.10 / 0.10 mm (4 / 4 mil)

1- and 2-layer: 0.10 / 0.10 mm (4 / 4 mil)

Multilayer: 0.09 / 0.09 mm (3.5 / 3.5 mil). 3 mil is acceptable in BGA fan-outs.

PCB Capability - Min. track width and spacing (1 oz)
Min. track width and spacing (2 oz)
0.16 / 0.16 mm (6.5 / 6.5 mil)

2-layer: 0.16 / 0.16 mm (6.5 / 6.5 mil)

Multilayer: 0.16 / 0.20 mm (6.5 / 8 mil)

Track width tolerance
±20%
e.g. For a 0.1 mm track, the finished track width ranges from 0.08 and 0.12 mm.
PTH annular ring
≧0.20mm

2-layer:

1 oz: Recommended 0.25 mm or above; absolute minimum 0.18 mm

2 oz: 0.254 mm or above


Multilayer:

1 oz: Recommended 0.20 mm or above; absolute minimum 0.15 mm

2 oz: 0.254 mm or above

PCB Capability - PTH annular ring
NPTH pad annular ring
≧0.45mm
Recommended 0.45 mm or more. This is to allow a 0.2 mm ring of copper to be removed around the hole for the sealing film to attach. Pad sizes smaller than the recommended value can result in the annular ring being very thin or completely missing.
PCB Capability - NPTH pad annular ring
BGA
0.25mm

① BGA pad diameter ≥ 0.25 mm

② BGA pad to trace clearance ≥ 0.1 mm (min. 0.09 mm for multilayer boards)

③ Vias can be placed within BGA pads using filled and plated-over vias

PCB Capability
Trace coils
0.15/0.15mm

Minimum trace width/clearance: 0.15/0.15mm, when traces are covered by solder mask (1oz).


Minimum trace width/clearance: 0.25/0.25mm, when traces are NOT covered by solder mask (1oz). ENIG only(high risk of short circuit with HASL)

PCB Capability - Trace coils
Hatched grid width and spacing
0.25 mm
PCB Capability - Hatched grid width and spacing
Same-net track spacing
0.25mm
PCB Capability - Same-net track spacing
Inner layer via hole to copper clearance
0.2mm
PCB Capability - Inner layer via hole to copper clearance
Inner layer PTH pad hole to copper clearance
0.3mm
Pad to track clearance
0.1mm
Min. 0.1 mm (stay well above if possible). Min. 0.09 mm locally for BGA pads
PCB Capability - Pad to track clearance
SMD pad to pad clearance (different nets)
0.15mm
More details of SMD pad spacing: SMD Components Minimum Spacing
PCB Capability - SMD pad to pad clearance (different nets)
Via hole to Track
0.2mm
PCB Capability - Via hole to Track
PTH to Track
0.28mm
0.35mm is recommended, minimum 0.28mm
PCB Capability - PTH to Track
NPTH to Track
0.2mm
PCB Capability - NPTH to Track

Features
Capability
Description
Patterns
Soldermask Expansion
0.038mm

2-layer: 0.038 mm expansion on each side of a pad. Keep at least 0.05 mm clearance between soldermask openings and neighboring traces.

Multilayer: No expansion required

Note: this rule does not conflict with Pad to track clearance Min. 0.1 mm

PCB Capability - Soldermask Expansion
Soldermask bridge
0.10mm

2-layer (1 oz):

Min. pad spacing: 0.20 mm (green, red, yellow, blue, purple)

Min. pad spacing: 0.23 mm (black, white)

Multilayer (1 oz):

Min. pad spacing: 0.10 mm (green, red, yellow, blue, purple)

Min. pad spacing: 0.13 mm (black, white)

PCB Capability
Plugged vias
Filled with soldermask

Vias are filled with soldermask for an opaque finish. See our vias & via covering guide

① Filled vias must not have soldermask openings on either side

② Filled vias should have ≥ 0.35 mm clearance from other soldermask openings (e.g. pads)

③ Filled vias must be no wider than 0.5 mm diameter

PCB Capability - Plugged vias
Microplacer Via-in-Pad Process

Epoxy Filled & Capped

Copper paste Filled&Capped

Vias are filled with epoxy resin or copper paste and then plated over to achieve an opaque and smooth finish.

① Vias are filled and plated over. Choose copper paste filling for applications requiring high thermal conductivity.

② This process is the default for 6-layer and above multilayer boards.

③ Compatible with via diameters from 0.15 to 0.5 mm.

PCB Capability - Microplacer Via-in-Pad Process
Solder mask dielectric constant
3.8
PCB Capability - Solder mask dielectric constant
Solder mask ink thickness
≥ 10μm

Features
Capability
Description
Patterns
Minimum Line Width
6 mil (0.153mm)
Characters width less than 6mil(0.153mm) will be unidentifiable.
PCB Capability - Minimum Line Width
Minimum text height
40 mil (1.0mm)
Characters height less than 40 mil(1.0mm) will be unidentifiable.
PCB Capability - Minimum text height
Character width to height ratio
1:6
The preferred ratio of width to height is 1:6.
PCB Capability - Character width to height ratio
Hollow-carved Character width to height ratio
1:6
The preferred ratio of width to height is 1:6
PCB Capability - Hollow-carved Character width to height ratio
Pad To Silkscreen
0.15mm
The Minimum Distance Between Pad and Silkscreen is 0.15mm.
PCB Capability - Pad To Silkscreen

Features
Capability
Description
Patterns
Routed
0.2mm

① Copper clearance from routed board edges: ≧0.2 mm

② Copper clearance from routed slots: ≧0.2 mm

③ Dimension tolerance for routed board edges: ±0.2 mm (regular precision); ±0.1 mm (high precision)

PCB Capability - Routed
V-Cut
0.4mm

① Copper clearance from V-cut board edges: ≧0.4 mm

② Dimension tolerance for V-cut board edges: ±0.4 mm. PCB thickness ≥ 0.6 mm

③ Zero panel board spacing by default. Alternatively, V-cut along one direction with no spacing and route along the other direction with 1.6 or 2 mm board spacing.

④ Min. panel dimensions: 70 × 70 mm; max. panel dimensions: 475 × 475 mm

⑤ V-cut groove angle: 25°

PCB Capability
Mouse bites Panel
0.2mm

① Copper clearance from non-mouse-bite board edges: ≧0.2 mm

② Dimension tolerance for non-mouse-bite board edges: ±0.2 mm (regular precision); ±0.1 mm (high precision)

③ Panel board spacing: 1.6 or 2 mm

④ Serrated edges will remain after depanelization

⑤ Minimum tooling edge width: 3 mm. For SMT assembly at Microplacer, use 5 mm tooling edges, 2 mm tooling holes, and 1 mm fiducials centered at 3.85 mm from the panel edges.

⑥ Recommended diameter of mouse bite is 0.5mm-0.8mm; Recommended distance between the two mouse-bites is 0.2-0.3mm. The minimum width of breakaway tab is 4mm. For breakaway with mouse-bites, the minimum width is 5mm.

PCB Capability
Panelization with space
2mm
The spacing between boards should be ≥ 2 mm, as narrow spacing results in difficulties for routing and V-cut.
PCB Capability - Panelization with space
Panel of Circular PCBs
≥20mmx20mm

The single round board size should be≥20mmx20mm when choose panel by Microplacer.

Panelize with stamp holes and add tooling strips on four board edges

PCB Capability - Panel of Circular PCBs

Related questions

Learn more — answers to the questions people ask next.

READY TO GET STARTED?

Our global sales team is here to assist you with all your Printed Circuit Board and PCB Assembly needs. Reach out to us for unparalleled support and service.

Streamline your innovation with seamless PCB ordering.

For More Details Contact Us